Welcome to the website of green ring technology (Tianjin) Co., Ltd!

  • 022-29398436

Copper ion / total copper online water quality analyzer (Cu)

Agriculture, forestry, animal husbandry and fishery, industrial and mining enterprises, municipal engineering,hydrology

and water conservancy, scientific research institutions, real estate and construction industry, etc

Copper ion / total copper online water quality analyzer (Cu)
The main pollution sources of copper are wastewater from electroplating, smelting, metal processing, mining, petrochemical and chemical industries. The toxicity of copper to aquatic organisms is related to its form, and the toxicity of free copper ion is greater than that of complex copper. Wtf3000 Cu copper ion / total copper online water quality analyzer is based on the national standard detection method, and the detection range is 0-2mg / L; 0-10mg / L. for high concentration water samples, we analyzed them by precise dilution method. Firstly, hydroxylamine hydrochloride is added into peristaltic pump to reduce Cu2 + to Cu2 +. In the solution with pH ≤ 7, Yutongling reacts with it to form a yellow complex. The absorbance value is determined at a specific wavelength, and the results are automatically calculated by built-in curve formula. According to the situation of water samples, in order to avoid interference ions affecting the analysis accuracy, it is necessary to add masking agent to remove interference ions.
Product overview

The main pollution sources of copper are wastewater from electroplating, smelting, metal processing, mining, petrochemical and chemical industries. The toxicity of copper to aquatic organisms is related to its form, and the toxicity of free copper ion is greater than that of complex copper.

Wtf3000 Cu copper ion / total copper online water quality analyzer is based on the national standard detection method, and the detection range is 0-2mg / L; 0-10mg / L. for high concentration water samples, we analyzed them by precise dilution method. Firstly, hydroxylamine hydrochloride is added into peristaltic pump to reduce Cu2 + to Cu2 +. In the solution with pH ≤ 7, Yutongling reacts with it to form a yellow complex. The absorbance value is determined at a specific wavelength, and the results are automatically calculated by built-in curve formula. According to the situation of water samples, in order to avoid interference ions affecting the analysis accuracy, it is necessary to add masking agent to remove interference ions.

Product features

·The total copper analysis was digested by potassium persulfate sealed at high temperature and high pressure;

·The quantitative analysis module is designed with small specifications, which saves reagents and reduces maintenance workload;

·Dynamic visualization, intuitive and convenient operation;

·Remote read and write data, support remote calibration and calibration;

·The software adopts hierarchical password management to ensure safe use;

·The instrument is equipped with automatic cleaning function and automatic calibration function;

·The external interface is reserved, and the expansion function can be customized according to the site conditions;

performance parameter

Performance parameters of wtf3000 Cu

Analysis method

Sodium diethyldithiocarbamate spectrophotometric method GB / T 13689-2007

Analysis range

0-2mg/L; 0-10mg / L (customizable)

detection limit

0.02mg/L

resolving power

<0.01mg/L

Error

<5% F.S.

Repeatability

5%

Span Drift

±5% F.S.

Analysis method

On the hour

Run hourly, up to 24 groups per day

Interval

Run for 0-9999 minutes at the set interval

Manual

Manual analysis

long-range

Modbus is used for remote control;Dry contact control

Calibration mode

Interval times

Interval calibration according to the number of analysis accumulation

Interval days

Interval calibration by operation days

Manual

Manual calibration

long-range

Remote control by MODBUS

Cleaning method

Automatic

Analysis and cleaning;Fault cleaning;Abnormal power off cleaning;Emergency stop cleaning

Manual

Manual cleaning

call the police

Lack of liquid alarm;Self check alarm;Fault alarm;Over limit alarm (one way relay)

Data

One 4-20mA analog

Communications

A standard Modbus protocol of RS232 or RS485 interface

Storage

About 20000 sets (automatically saved after power failure);Support u disk to export Excel;

Printing

Miniature industrial thermal printer (optional)

Reagent dosage

About 650 times / set (3 months)

Maintenance cycle

About 30 days, 45 minutes

Display unit

7Inch LCD, 800 * 480 resolution, TFT true color touch screen

Use environment

5-35 ℃, humidity < 90% (no condensation)

Water sample temperature

5—35℃

Interference

Fe Mn Ni Co

Water extraction unit

For the circulation and retention of water samples;Automatic back flushing precision filtration system (optional)

Dimensions

one thousand and five hundred×five hundred×400mm (including reagent cabinet)

Weight

45kg (including reagent cabinet)

Power Supply

AC 220V ± 10%, 50Hz ± 1%

Power

150W

technical service

Green ring company provides you with:

1. Water quality monitoring technical consultation and formulation of application scheme

2. Customized supporting products according to the site environment

3. Debugging and acceptance of instruments and supporting equipment

4. On site training of instrument use methods and precautions

5. After sales maintenance and repair service

Green ring company can provide customized product services for customers to meet their on-site needs. The supporting products provided by Jingxiang company include:

one   Data acquisition and transmission network: remote transmission of field data to the user terminal (server, PC terminal), to achieve remote monitoring, according to the communication protocol provided by the user     Develop the data format and connect with the local relevant departments.

two   Analysis data PC client: through the configured computer, the analysis data will be transmitted to the computer in real time, or connected with the outdoor LED electronic LCD screen.

three   Water quality regulation dosing unit: according to the instrument analysis data, real-time regulation of supporting dosing equipment, inlet and outlet valves and other third-party equipment.

four   Pump control unit: it provides the control service of pump equipment on site, and can realize manual / automatic operation.

five   Water quality pretreatment unit: in view of the conditions of high temperature and high pollution of water samples, it is necessary to carry out physical purification or cooling treatment for water samples, so as to meet the requirements of analysis.

Some consumables and accessories

name

Company

Recommended replacement cycle (6 times / day)

Analytical reagent

Set (1L)

3Months

Standard sample

Set (1L)

3Months

Peristaltic pump pipe stuck

root

6Months

Drain pipe

root

6Months


Green ring promises that the reagent formula is fully open. Jingxiang provides analytical reagents and standard samples for customers to prepare.

Last product :
No Data
No Data
: Next product