Agriculture, forestry, animal husbandry and fishery, industrial and mining enterprises, municipal engineering,hydrology
and water conservancy, scientific research institutions, real estate and construction industry, etc
Em-5-cd continuous emission monitoring system (CEMS) consists of four basic parts: smoke monitoring subsystem, gaseous pollutant monitoring subsystem, smoke parameter monitoring subsystem, system control and data acquisition and processing subsystem. It can monitor SO2, NOx, O2, dust, temperature, pressure, flow rate and other parameters in the gas. It can also expand the monitoring of HCl, HF, Co, CO2, humidity and other parameters for specific occasions. The measured gas passes through the sampling probe for dust removal, heat tracing tube sampling, multi-stage filtration and two-stage condensation for rapid water removal and cooling, and then enters the micro heat tracing gas analysis module (DOAS and TDLAS Technology) for analysis and measurement. The dry method can effectively solve the technical problems such as the large fluctuation of data measurement caused by the large change of humidity such as waste incineration.
Second stage condensation can remove water and cool down quickly, reduce the contact time of gas and water, and reduce the loss of SO2;
The analyzer adopts micro heat tracing technology to reduce the maintenance cycle of the measuring cell;
Fast loop sampling pump sampling, fast response time;
Multistage filtration for water and dust removal, high reliability;
The whole calibration can be realized.
Application scenarios: coal fired power plant, garbage power plant, cement plant, glass plant, lime plant, ceramic plant, sintering plant, coke oven, desulfurization process, denitration process and other exhaust emission monitoring and process control.
SO2：0～300～3000ppm，O2 ： 0～25%
NOx: 0-300-3000ppm, humidity: 0-40%
Dust: 0 ~ 200mg / m3, 0 ~ 10g / m3
Flow rate: 0 ~ 40m / S (customizable)
Temperature: 0 ~ 300 ℃ (customizable)
Pressure: - 10KPA ～ + 10KPA (customizable)
Size: 880 mm × 600mm × 1800mm
Heat tracing temperature: 120 ℃～ 180 ℃
Protection grade: cabinet ip42, others IP65
Power supply: 220VAC, 4000W
Working temperature: - 10 ℃～ + 40 ℃
Working humidity: 0-95% RH (no condensation)